RICOH THETA Z1
User Guide

You can use the Bluetooth^® function to connect the camera to the Remote Control TR-1 (sold separately).
Set the camera in advance so that the plug-in “REMOTE CONTROL” can be run.

• Changing the Plug-ins Available on the Camera

1. Turn on the power of the camera.

   

2. Press and hold the mode button.

   

   • The plug-in selection screen is displayed on the OLED panel.
3. Press the mode button to select “REMOTE CONTROL”.

   

   • Running the Plug-ins
   • flashes on the OLED panel.
4. Press and hold the shutter button on the Remote Control TR-1 to set it to the pairing state or connection standby state.
   • When the camera is connected to the Remote Control TR-1, becomes lit on the OLED panel.

Disconnecting the Remote Control TR-1 from the Camera

1. Press and hold the mode button.
   • When multiple plug-ins are installed in the camera, select “REMOTE CONTROL”, and then press and hold the mode button.

   

   • turns off on the OLED panel, and the Remote Control TR-1 is disconnected from the camera

Resetting the Connection Information

When you want to connect another device to the camera or when the Remote Control TR-1 cannot be connected correctly, press and hold the wireless button and mode button simultaneously to reset the connection information.