RICOH THETA SC2
User Guide

Updating the Camera Firmware Using a Computer

The camera firmware can be updated using the basic app for computer.

The app is required to update the firmware. Download the app from the following site.
https://support.theta360.com/uk/download/

  1. Start the basic app for computer.
  2. Select [File] → [Firmware Update] in the menu.
  3. Follow the instructions on the screen to connect the camera to the computer using the provided USB cable.

  4. Select [To next].
  5. Check the current version and available version, and select [To next].
    • The firmware file transfer starts.
  6. When “Transfer Done” is displayed, follow the instructions on the screen to update the firmware on the device.

Caution

  • Fully insert the USB cable when connecting it.
  • Do not disconnect the camera from the computer during the firmware file transfer.
  • Do not turn off the power during the firmware update, as this may damage the camera.

Note

  • and flash alternately on the OLED panel of the camera during the firmware update.