RICOH THETA Z1
User Guide

Checking and Changing the Camera Settings

The status of the camera can be checked and various settings can be made with the basic app for smartphone.

  1. Tap [Settings] on the main screen of the basic app for smartphone.
    • The [Settings] screen is displayed.

Setting Items

The following setting items are displayed on the [Settings] screen.

Connection:
The connection status between the camera and the smartphone can be checked.
Change Wi-Fi Password:
The wireless LAN connection status can be checked and the password can be changed. Follow the procedure below to change the password.
  1. Enter a new password (8 or more characters) and tap [Change Password] at the bottom of the screen.
    • Single-byte alphanumeric characters and symbols can be used. (Spaces cannot be used.)
  2. When the password has been changed successfully, press the wireless button of the camera to turn the wireless LAN function off and back on.
    • The password is not changed until the wireless LAN function is turned off.
  3. Tap [Cam images] or the shutter button to connect the camera to the smartphone again.
    • If you cannot connect the camera to the smartphone, delete the old camera information used before the password change and enter the new password in the Wi-FiTM settings of the smartphone.

Caution

  • The password can be changed only when the camera is connected to the smartphone.

Note

  • Note that the previous password can no longer be used.
  • If you have forgotten the password, press and hold the wireless button and mode button simultaneously to restore the default password. The power turns off automatically when the password is reset successfully.
Cam Bluetooth settings:
The on/off status of the camera Bluetooth function and GPS continuous transfer function can be checked, and the status can be switched on/off.
Wi-Fi frequency band:
The frequency band for wireless LANs can be changed.
  1. Tap [Settings] on the main screen of the basic app for smartphone.
    • The [Settings] screen is displayed.
  2. Tap [Wi-Fi frequency band].
    • The message “Use only indoors when setting the frequency band to 5 GHz.” appears.
  3. Tap the frequency band to use.

Note

    • When the frequency band is set to 5 GHz, use the camera indoors only.
    • The changed frequency band becomes effective when the wireless LAN function is turned on next time.
    • When the power of the camera is turned on or the sleep mode is turned off while the frequency band is set to 5 GHz, the wireless LAN function is turned off.
    • The Wi-Fi frequency band can be reset to 2.4 GHz by pressing and holding the wireless button and mode button simultaneously while the power is on. Note that the password is also initialized.
Camera settings:
The following camera settings can be checked and changed.
Sleep Mode:
The length of time before the camera enters the sleep mode can be set. (3 minutes, 5 minutes, 7 minutes, 10 minutes, OFF)
Auto power off:
The length of time before the camera automatically turns off can be set. (1 hour, 2 hours, 4 hours, 8 hours, 12 hours, 18 hours, 24 hours, 48 hours, OFF)
Camera shutter volume*:
The volume of the shutter sound can be set. (High, Medium, Low, OFF)
Transfer method*:
You can select whether to keep the images on the camera when transferring images from the camera to the smartphone. Select [Copy] to retain the images in the internal memory after transfer or select [Move] to delete the images from the internal memory after transfer.
Plug-in*:
The function enabled when the plug-in is run can be checked and changed.
Camera version*:
The firmware version of the camera can be checked.
Camera license*:
The licenses used for the camera can be checked.
Share Settings:
The account for each social networking service can be set.

* Settings can only be checked and changed when the camera is connected to the smartphone.

▲ Back to Top